Bogen Network Router RPKUTI1 User Manual

RPKUTI1

Rack Mount &

Security Cover for UTI1

Description

The RPKUTI1 Rack Mount and Security Cover provides protection against tampering of the UTI1

settings and connections and offers the option of rack mounting the UTI1. Knockout sections on

both the cover and the rack ears are provided to facilitate wire entry and exit.

Package Contents

•

Security Cover

Rack Ears (2)

Security Cover Screws (2)

Rack Ear Screws (2)

Installation

Rack Ears

Knockouts are located on the sides of the rack

ears for wire access. Remove these knockouts as

needed prior to attaching the rack ears to the

UTI1.

1. Attach each rack ear to the UTI1 using the

screws already installed in the UTI1.

2. Install one of the provided rack ear screws in

the remaining mounting hole of each

RPKUTI1 rack ear.

Security Cover

Knockouts are located underneath and on both

sides of the security cover for wire access.

Remove these knockouts as needed prior to

attaching the security cover to the UTI1.

1. Hook the security cover to the UTI1.

2. Screw the security cover to the UTI1 using

the two security cover screws provided.

54-2119-01A

Specifications subject to change without notice.

0408